requirements

support Hardware

# This file is where you keep secret settings, passwords, and tokens! # If you put them in the code you risk committing that info or sharing it

secrets = {
    'hostname' : 'LOLIN S3 with ESP32S3',
    'ssid' : 'mySSID',
    'password' : 'myWIFI_Password',
    'aio_username' : 'my_adafruit_io_username',
    'aio_key' : 'my_adafruit_io_key',
    'timezone' : "Europe/Berlin", # http://worldtimeapi.org/timezone,
    'utc_diff' : 2,
    'ntp_server' : 'de.pool.ntp.org',
    'ap_ssid' : 'my_AP_SSID',
    'auth' : 'None',
    'channel' : 1
    }

>>> import webrepl_setup
WebREPL daemon auto-start status: enabled

Would you like to (E)nable or (D)isable it running on boot?
(Empty line to quit)
> e
Would you like to change WebREPL password? (y/n) y
New password (4-9 chars): micro
Confirm password: micro
No further action required

import mip
mip.install("github:go2m/s_ilib/micropython/mpyOS/")
or
mip.install("github:go2m/s_ilib/micropython/mpyOS/",target="/")
for Raspberry PICO W
mip.install("github:go2m/s_ilib/micropython/mpyOS/",target=".")

mip.install(“github:go2m/s_ilib/micropython/mpyOS/”) mip.install(“github:go2m/s_ilib/micropython/mpyOS/”,target=”/temp”) mip.install(“github:go2m/s_ilib/micropython/mpyOS/main.py”,target=”/temp”)

{
"urls": [
    ["webrepl_cfg.py", "github:go2m/s_ilib/micropython/mpyOS/webrepl_cfg.py"],
    ["boot.py", "github:go2m/s_ilib/micropython/mpyOS/boot.py"],
    ["main.py", "github:go2m/s_ilib/micropython/mpyOS/main.py"],
    ["lib/debug.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/debug.mpy"],
    ["lib/go2m_aes_decrypt_all.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/go2m_aes_decrypt_all.mpy"],
    ["lib/go2m_mpyaes.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/go2m_mpyaes.mpy"],
    ["lib/go2m_os_hw.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/go2m_os_hw.mpy"],
    ["lib/md5.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/md5.mpy"],
    ["lib/microWebCli.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/microWebCli.mpy"],
    ["lib/sccp.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/sccp.mpy"],
    ["lib/urequests.mpy", "github:go2m/s_ilib/micropython/mpyOS/lib/urequests.mpy"],
    [".ilib/l.pya", "github:go2m/s_ilib/micropython/mpyOS/_ilib/l.pya"]
],
"version": "0.12"
}

if you want to use webrepl, run

import webrepl_setup

MPY: soft reboot
WebREPL server started on http://10.0.1.89:8266/
Started webrepl in normal mode
CL: f4:12:fa:cb:21:f0
Network configuration CL: ('10.0.1.89', '255.255.255.0', '10.0.1.1', '10.0.1.1')
[Errno 2] ENOENT
root is empty
main finsh
MicroPython v1.19.1-602-g515088ffd3 on 2022-10-13; LOLIN S3 with ESP32S3
Type "help()" for more information.